GREGARIODownload on the App Store

How often should you replace your chain?

There's no single number that works for everyone. But there's a simple way to know when it's time, before the chain takes your cassette and chainrings with it.

By Marco BeniaminUpdated 20 November 2026Sources at the bottom of the page
Replace at 0.5% (11-speed and up)
The checker sits between the rollers: if it drops in, the chain needs replacing. Drawn in the style of the app's bikes.
In this guide
  1. Why a chain stretches
  2. How to measure it
  3. So how many km?
  4. What happens if you wait
  5. Lube and rain
  6. Sources
In short
  • You don't replace a chain at a fixed mileage: you replace it when the stretch goes past the limit.
  • The limit depends on the drivetrain: 0.5% for 11-speed and up, 0.75% up to 10.
  • Measuring takes a minute; waiting too long costs you a cassette and chainrings.

Why a chain stretches

A chain doesn't really stretch: its internal parts, the rivets and rollers, wear out, and that makes it look longer1. With every pedal stroke the play grows a little, and the distance from one rivet to the next goes past nominal.

A stretched chain no longer sits properly on the cog and chainring teeth, and wears them in turn1.

How to measure it

The easiest way is a chain checker: it sits between the rollers and tells you straight away whether the stretch has gone past the limit2. With no checker, a steel ruler will do: line a rivet up with zero and count 24 more. The last one should sit at 12 inches (30.48 cm); if it is more than 1/16 inch past, about 1.6 mm, the chain needs replacing1.

DrivetrainReplace atSource
11-speed and up0.5%1
Up to 10-speed0.75%1
Single-speed1%1

How often should you check? An occasional check is enough, and it becomes a habit if you do it when you clean the chain.

So how many km?

There isn't an answer in km: the guidance talks about stretch, not distance, and every drivetrain maker has its own specifications1. How many km it takes to get there depends on how you ride, where, and how often you clean and lube: that's why measuring pays.

If your drivetrain has its own limit, that's the one to follow: the maker's manual comes before general rules2.

What happens if you wait

A chain used past its limit wears out the cogs and chainrings early, and a new cassette costs far more than a new chain1. Slipping under load is one of the signs of a worn chain too1.

Lube and rain

A clean, lubed chain lasts longer. After a ride in the rain the water washes the oil away and leaves grit behind: time to clean and lube again. There's more in the guide Lubing your chain after rain.

Sources
  1. When to Replace a Worn Chain, Park Tool.
  2. CC-4.2 Chain Checker, Park Tool.
More guides

Keep reading