GREGARIODownload on the App Store

Disc brake pads: when to replace them

Pads wear quietly, and much faster in the rain. Looking at them once a month is enough to never reach the metal.

By Marco BeniaminUpdated 20 November 2026Sources at the bottom of the page
In this guide
  1. Minimum thickness
  2. How often to look
  3. Organic or sintered
  4. And the rotors?
  5. Sources
In short
  • For SRAM they need replacing when pad and backing plate together measure 3 mm or less.
  • Check them every month, more often if you ride in sand and dirt.
  • Organic pads wear faster, especially in the wet; sintered pads cope better with water and mud.

Minimum thickness

SRAM gives a simple limit: when the total thickness of the backing plate and pad material is 3 mm or less, the pads are worn and need replacing1. The rule is the same for MTB and road brakes12.

Every maker has its own limit and its own way of measuring: if your brakes aren't SRAM, look for the figure in their manual.

How often to look

SRAM recommends checking your pads every month, and more often when riding in sandy or dirty conditions1.

How to look With the wheel out, look into the caliper from above: you can see both pads and how much material is left on the plate.

Organic or sintered

SRAM pads come in two types, organic and sintered, and they wear differently4:

CompoundHow it behavesSource
Sintered (copper backing plate)works in all conditions, especially wet and mud; louder4
Organicquieter; wears faster, especially in the wet4

If you switch compound, SRAM says to replace the rotors too43.

And the rotors?

Rotors wear too, but much more slowly. SRAM says to replace them once they have worn by 0.3 mm or when they are thinner than the minimum stamped on the rotor3.

Sources
  1. When should my SRAM brake pads be replaced?, SRAM.
  2. When should my SRAM road brake pads be replaced?, SRAM.
  3. When should I replace my SRAM brake rotor?, SRAM.
  4. Brake Pad Overview, SRAM.
More guides

Keep reading