GREGARIODownload on the App Store

Tubeless sealant: how often to top it up

Sealant doesn't wear with distance but with time: inside the tyre it dries out and plugs tiny holes you never see. That's why it needs checking even if the bike stays home.

By Marco BeniaminUpdated 20 November 2026Sources at the bottom of the page
In this guide
  1. Why it runs out
  2. How long it lasts
  3. How often to check
  4. How to check
  5. Sources
In short
  • Stan's Original lasts 2–7 months on average in the tyre; Race Day 2–3.
  • In hot summer months, check it every 30–45 days.
  • On a new tyre, check it 2–3 weeks after fitting.

Why it runs out

Heat makes liquid sealant evaporate faster1. And while you ride it plugs tiny punctures you never notice, so the amount in the tyre slowly goes down1.

How long it lasts

SealantLasts in the tyreSource
Stan's Originalabout 2–7 months on average1
Stan's Race Dayabout 2–3 months1
Stan's Rolled Goldabout 2–6 months on average1
Schwalbe Doc Blueabout 2,000 km or 2–7 months2

Schwalbe also says the period varies a lot with temperature2.

How often to check

In hot months Stan's suggests checking every 30–45 days, and on a new tyre 2–3 weeks after fitting it1. Schwalbe recommends checking, and replacing if needed, before a race or a long tour2.

How to check

The quickest way: shake the wheel next to your ear. If you hear liquid sloshing, there is still active sealant1.

To know how much is left, Stan's suggests a dipstick: with the valve core out, push a thin zip tie or a straw through the valve to the bottom of the tyre, and see how much comes out wet1.

Sources
  1. How long will the sealant last in my tire?, Stan's NoTubes.
  2. Tubeless, Schwalbe.
More guides

Keep reading